CrossCutSled Hardware & Tools list Metric(mm)
Here is the official shopping list for this project. These links will automatically direct you to your local Amazon store. (As an Amazon Associate I earn from qualifying purchases at no extra cost to you. This helps support Tiny Cabin Woodworks!)
| Size/Spec | Buy on Amazon |
| --- Hardware --- | |
| [A] T-Track 19mm x 9.5mm x 400mm (3 pcs) | https://geni.us/ttrack400 |
| [B] T-Track 19mm x 9.5mm x 600mm (1 pcs) | https://geni.us/ttrack600 |
| [C] T-Track Bolt M6 x 40mm (3 pcs) | https://geni.us/ttbolt |
| [D] Star Knob M6 (3 pcs) | https://geni.us/starknobm6 |
| [E] T-Track hold down clamp (2 pcs) | https://geni.us/tthdc |
| [F] Parallel Clamp (3 pcs) | https://geni.us/parallelc600 |
| --- Bits & Supplies --- | |
| 45 Degree Chamfer Bit | https://geni.us/v45dc |
| 8mm Straight Bit | https://geni.us/8trsv |
| 15mm Straight Bit | https://geni.us/15trsv |
| countersink bit with depth stop | https://geni.us/cdbds |
| 3.8mm Metal Drill Bit | https://geni.us/mdb38 |
| 8mm Drill Bit | https://geni.us/db8mm |
| Countersink bit | https://geni.us/countersink |
| All-Purpose Clear Adhesive | https://geni.us/APCAdhesive |
| CA Glue | https://geni.us/cagluew |
| Wood Glue | https://geni.us/wglue |
| Double-Sided Tape | https://geni.us/dswt |
| Self adhesive measuring tape (l to r /r to l) | https://geni.us/samt |
| Digital Caliper | https://geni.us/digicall |
| --- Power Tools --- | |
| Table saw DWE7485 (Or equivalent) | https://geni.us/dwe7485 |
| Micro Jig GRR-RIPPER GR-200 | https://geni.us/gr200 |
| Impact Driver Makita DTD173Z 18V (Or equivalent) | https://geni.us/impact18 |
| Trim Router Makita XTR01Z/DRT50Z 18V (Or equivalent) | https://geni.us/trimrouter18 |
| Portable Band Saw Makita DPB182Z /Makita DPB183Z 18V (Or equivalent) | https://geni.us/bandsaw18 |